The Burris Veracity riflescope is renowned for its precision and reliability, but like any piece of precision equipment, occasional issues can arise. One such problem reported by some users is the elevation knob failing to reset to its zero position. This can significantly impact accuracy and shooting performance. This guide will explore potential causes and offer effective troubleshooting steps to resolve this frustrating issue.
Understanding the Burris Veracity Elevation Mechanism
Before diving into troubleshooting, it's crucial to understand the mechanics of the Burris Veracity's elevation adjustment system. The elevation knob is connected to an internal mechanism that moves the reticle vertically within the scope. This mechanism is typically precise and robust, but several factors can disrupt its proper function.
Common Causes of Elevation Knob Reset Issues
Several factors can contribute to the elevation knob on your Burris Veracity not resetting:
1. Mechanical Binding or Obstruction:
- Foreign Material: Dust, debris, or even small particles can get lodged within the internal mechanism, preventing smooth operation and accurate resetting.
- Bent Components: A dropped or impacted scope could have bent internal components, interfering with the reset mechanism.
- Manufacturing Defect: While rare, a manufacturing defect could cause the knob to malfunction.
2. Loose or Damaged Components:
- Loose Set Screws: The screws securing the elevation knob or internal components may have loosened over time, causing the knob to become loose or unresponsive.
- Damaged Gears or Springs: Wear and tear, or excessive force applied to the knob, can damage internal gears or springs.
3. Improper Installation or Handling:
- Incorrect Mounting: Improper mounting of the scope on the rifle can cause undue stress on the internal components, impacting the elevation knob's functionality.
- Excessive Force: Applying excessive force when adjusting the elevation knob can strain or damage the internal mechanism.
Troubleshooting Steps:
Before resorting to more advanced solutions or contacting Burris customer service, try these troubleshooting steps:
1. Cleaning the Scope:
- External Cleaning: Carefully clean the exterior of the scope, paying close attention to the elevation knob and surrounding areas. Use a soft cloth and compressed air to remove any dust or debris. Avoid using harsh chemicals or solvents.
- Internal Inspection (Advanced): If comfortable disassembling the scope (refer to your owner's manual!), carefully inspect the internal mechanism for any obstructions or damage. This requires careful attention to detail and should only be attempted if you have experience with repairing optical equipment.
2. Checking for Loose Components:
- Set Screws: Carefully check all set screws related to the elevation mechanism for looseness. Tighten any loose screws using a small screwdriver. Do not over-tighten.
3. Re-Mounting the Scope:
- Proper Alignment: Ensure the scope is properly mounted on the rifle, with rings properly tightened and aligned. Misalignment can put undue stress on the internal components.
4. Contacting Burris Customer Service:
If the above steps fail to resolve the issue, it's time to contact Burris customer service. They can provide expert advice, diagnose the problem, and potentially offer repair or replacement options.
Preventing Future Issues:
- Regular Cleaning: Regularly clean your scope to prevent the accumulation of dust and debris.
- Proper Handling: Avoid dropping or impacting your scope.
- Avoid Excessive Force: Never use excessive force when adjusting the elevation knob.
By carefully following these steps and understanding the potential causes, you can effectively troubleshoot a Burris Veracity elevation knob that won't reset, restoring your scope to its peak performance. Remember, proper maintenance and careful handling are key to maintaining the longevity and accuracy of your valuable optics.
